The next chapter in the melting saga

If you’ve been reading this blog a while you may recall one of the stories of my coworker’s car when his charge plug melted. For a refresher here is a picture of the plug:
Melted Vehicle connector

After getting the vehicle side connector replaced twice he finally had Bosch come out and replace the vehicle side wiring of his Power Xpress EVSE. Since then we’ve both been contacted about a recall of the Power Xpress unit. Since then I’ve received a phone call from Bosch stating that parts are finally available and I’ll be contacted by an electrician to swap out the cables.

The funny thing is that last week I received an e-mail with a tracking number from Bosch. Today that package was delivered:
Power Xpress harness

A shiny new wiring harness for my Power Xpress unit (Note that I have not been charging my FFE with the Power Xpress since my coworkers problems with it and about the same time I had noticed that the handle was starting to get a little warm in the morning after a charge. I’ve been making due with either the Juicebox or the Clipper Creek EVSE’s that I have).

What is more interesting about this shipment is that it comes with very clear instructions on how to swap out the wiring harness. I may just do the swap myself and when the electrician calls just tell them that I’ve already performed the task. (The procedure is pretty simple: remove a panel, disconnect the old wires, unscrew the strain relief, remove the old wire, insert the new wire, connect wires, tighten strain relief, and replace the panel.)

Taking a close look at the plug:
Power Xpress plug
Oooh all shiny: These contacts are silver coated. Silver coated contacts don’t corrode. The old plug is all copper which can oxidize and introduce some resistance. Given that 240V at ~30A goes through there even a small amount of resistance here will generate some heat.

Now I’m awaiting a phone call…LOL.

 

One Thought on “The next chapter in the melting saga

  1. Pingback: DIY Recall | Some spare electrons from driving a Focus Electric

Post Navigation